In order to extend the service life of your chair and have the best possible experience, try following our simple rules of operation and maintenance listed below:
Usage:
1️⃣ Prevent increased loads on the mechanisms, do not allow two people to sit on the same seat, do not use the seat to hold heavy boxes, etc.
2️⃣ Prevent the chair from being used for purposes other than intended, such as rolling, sitting on the armrests, or placing your feet on the seat.
3️⃣ We do not recommend putting loads on it when adjusting the angle of the backrest; do not deviate or adjust the angle in an unnatural way when leaning back.
4️⃣ Regularly carry out diagnostics on the mechanisms, once every six months check the condition of the fastening elements, moving parts, built-in mechanisms and tighten the fastening bolts, if necessary.
5️⃣ Operate the chair in stable temperature conditions: avoid sharp temperature drops, high humidity, sunlight hitting the upholstery, etc.
6️⃣ Avoid contact with bare skin. Sweat contains salt, the chair’s lining material will absorb this salt. As a result, it will begin to harden, lose its original appearance, and even break down (especially with regard to PU leather).
Here are some tips on how to care for PU leather:
🔸 Daily cleaning: For daily maintenance, simply wipe the PU leather surface with a soft dry cloth or microfiber to remove dust and dirt.
🔸 Stain removal: If stains appear on the PU leather, you can use a damp cloth or microfibre, slightly moistened in running water. Carefully wipe the stain, avoid using aggressive detergents.
🔸 Detergents: If a deeper cleaning is required, a special PU leather cleaner can be used. Before use, check that it is suitable for your particular type of PU leather, as some cleaners may be too harsh.
🔸 Sun protection: Avoid bending the PU leather in strong sunlight for an extended period, as this may cause burning and damage to the material.
🔸 Avoid friction and scratches: Avoid contact with sharp and rough objects that may cause scratches or damage to the PU leather surface.
🔸 Storage: Store PU leather products in a dry and cool place, away from direct sunlight and moisture.
🔸 Protection against liquids: Avoid contact with liquids as they may stain or damage the material. Try to minimize the contact area of the chair with exposed areas of your skin. Prolonged exposure to sweat on PU leather significantly shortens its service life and leads to destruction.
🔸 Care products: There are special PU leather care products, such as sprays or creams, that help keep the material in good condition. It is important to only use the means recommended by the manufacturer.
Regarding seats with fabric upholstery:
✅ Daily cleaning: Regularly wipe the surface of the fabric with a soft dry cloth or microfibre to remove dust, dirt, and small particles.
✅ Stain removal: If stains appear on the fabric, act as soon as possible. Use a soft cloth slightly dampened in cold water or a special fabric stain remover. Stains should be removed while they are fresh.
✅ Sun protection: Avoid long-term accidental exposure to strong sunlight on the fabric as this can cause burning and diminish the fabric’s color.
✅ Vacuum: Use a vacuum regularly with a fabric attachment to remove more dust and dirt.
✅ Stubborn stains: If stubborn stains have made their way into the fabric, try using a special fabric stain remover or have it professionally dry cleaned.
❗️It is always recommended to check the manufacturer's instructions or label directions before using any care products on your chair.
